文書の表示以前のリビジョンバックリンク全て展開する/折り畳む文書の先頭へ この文書は読取専用です。文書のソースを閲覧することは可能ですが、変更はできません。もし変更したい場合は管理者に連絡してください。 ====== IX2215のファームウェアを更新する ====== ===== 試した環境 ===== * UNIVERGE IX2215 * IPアドレス:192.168.1.3 * USBシリアル接続 * TFTPD64 v4.64 (Windows 10 Pro. x64) * IPアドレス:192.168.1.2 ===== 手順 ===== TFTPD64の設定は割愛。フォルダにファームウェアを放り込んでtftpd64.exeを起動するだけなので、何も難しいことはないだろうけど… ==== 既存のファームウェアのバックアップ ==== 念のためIX2215に最初から入っているファームウェアをバックアップしておく。 既存のファームウェアの確認。 <code> Router# config Router(config)# show flash Codes: M - Main-side, B - Backup-side, N - Newfile, R - Runnable A - Active-file, + - Next-boot, * - Bootmode-entry Length Name Status 4977665 ix2215-ms-8.10.11.b.ldc MA [4977392 bytes used, 22005202 available, 26982594 total] 26368 Kbytes of processor board System flash (Read/Write) </code> GE2にIPアドレスを振る。 <code> Router(config)# interface GigaEther2.0 Router(config-GigaEther2.0)# ip address dhcp receive-default Router(config-GigaEther2.0)# no shutdown Router(config-GigaEthernet2.0)# show ip address Interface GigaEthernet2.0 is up, line protocol is up Internet address is 192.168.1.3/24 Broadcast address is 255.255.255.255 Address determined by DHCP Primary DNS server is 192.168.1.1 </code> TFTPサーバにファームウェアをアップロードする。 <code> Rounter(config-GigaEther2.0)# exit Router(config)# tftp put ix2215-ms-8.10.11.b.ldc 192.168.1.2:ix2215-ms-8.10.11.b.ldc ................................................................................................................................................................................................................................................................................................................ TFTP transfer complete, 4977665 bytes, MD5 = 89e85ed9357d0b405995f21ab93edc61 </code> ==== ファームウェアの更新 ==== <code> Router(config)# software-update tftp://192.168.1.2/ix2215-boot-22.1-gate-ms-10.7.18.rap % Downloading ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ TFTP transfer complete, 10483413 bytes, MD5 = 990bf782378de452866e3a8b020abfef % Check ...... done % Update file name is ix2215-ms-10.7.18.ldc % Writing .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................. done % Software update completed. </code> 念のため内蔵フラッシュの状態を確認。 <code> Router(config)# show flash Codes: M - Main-side, B - Backup-side, N - Newfile, R - Runnable A - Active-file, + - Next-boot, * - Bootmode-entry Length Name Status 4977665 ix2215-ms-8.10.11.b.ldc MA 8991293 ix2215-ms-10.7.18.ldc N+ [14015288 bytes used, 12967306 available, 26982594 total] 26368 Kbytes of processor board System flash (Read/Write) </code> ルータを再起動 <code> Router(config)# reload % Warning: current running-configuration is not saved yet. Notice: The router will be RELOADED. This is to ensure that the peripheral devices are properly initialized. Are you sure you want to reload the router? (Yes or [No]): yes NEC Bootstrap Software Copyright (c) NEC Corporation 2001-2022. All rights reserved. %BOOT-INFO: Trying flash load, exec-image [ix2215-ms-10.7.18.ldc]. Loading: ######################################################################################################################################### [OK] </code> <code> Router(config)# show flash Codes: M - Main-side, B - Backup-side, N - Newfile, R - Runnable A - Active-file, + - Next-boot, * - Bootmode-entry Length Name Status 4977665 ix2215-ms-8.10.11.b.ldc B 8991293 ix2215-ms-10.7.18.ldc MA [14015288 bytes used, 12967306 available, 26982594 total] 26368 Kbytes of processor board System flash (Read/Write) </code> ===== 参考サイト ===== * [[https://pjo2.github.io/tftpd64/|TFTPD64 : an opensource IPv6 ready TFTP server/service for windows : TFTP server]] * [[https://zazameta.net/archives/4585|NEC UNIVERGE IX(IX2105)のFWをTFTPを使用してバックアップする – Studio zazameta blog]] * [[https://kurochan-note.hatenablog.jp/entry/2016/06/12/202430|NEC IX2105のファームウェアをアップデートする - くろの雑記帳]] network/univerge/ix2215_update_firmware.txt 最終更新: 2023-01-21 16:27by Decomo