差分
このページの2つのバージョン間の差分を表示します。
| 両方とも前のリビジョン 前のリビジョン | |||
|
blog:2022:2022-01-13 [2022-02-21 17:28] Decomo |
blog:2022:2022-01-13 [2022-03-23 11:51] (現在) Decomo |
||
|---|---|---|---|
| 行 48: | 行 48: | ||
| アクティブモードとパッシブモードの切り替えは''/ | アクティブモードとパッシブモードの切り替えは''/ | ||
| + | |||
| + | < | ||
| + | # cpupower frequency-info | ||
| + | analyzing CPU 0: | ||
| + | driver: intel_cpufreq | ||
| + | CPUs which run at the same hardware frequency: 0 | ||
| + | CPUs which need to have their frequency coordinated by software: 0 | ||
| + | maximum transition latency: 20.0 us | ||
| + | hardware limits: 1.20 GHz - 3.30 GHz | ||
| + | available cpufreq governors: conservative ondemand userspace powersave performance schedutil | ||
| + | current policy: frequency should be within 1.20 GHz and 3.30 GHz. | ||
| + | The governor " | ||
| + | within this range. | ||
| + | current CPU frequency: Unable to call hardware | ||
| + | current CPU frequency: 1.30 GHz (asserted by call to kernel) | ||
| + | boost state support: | ||
| + | Supported: yes | ||
| + | Active: yes | ||
| + | |||
| + | # echo active > / | ||
| + | |||
| + | # cpupower frequency-info | ||
| + | analyzing CPU 0: | ||
| + | driver: intel_pstate | ||
| + | CPUs which run at the same hardware frequency: 0 | ||
| + | CPUs which need to have their frequency coordinated by software: 0 | ||
| + | maximum transition latency: | ||
| + | hardware limits: 1.20 GHz - 3.30 GHz | ||
| + | available cpufreq governors: performance powersave | ||
| + | current policy: frequency should be within 1.20 GHz and 3.30 GHz. | ||
| + | The governor " | ||
| + | within this range. | ||
| + | current CPU frequency: Unable to call hardware | ||
| + | current CPU frequency: 1.20 GHz (asserted by call to kernel) | ||
| + | boost state support: | ||
| + | Supported: yes | ||
| + | Active: yes | ||
| + | </ | ||
| ====== 参考サイト ====== | ====== 参考サイト ====== | ||