en:virtualization:proxmox_ve_6_2_enable_connectx3_en_in_installer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
en:virtualization:proxmox_ve_6_2_enable_connectx3_en_in_installer [2020-12-28 09:26]
Decomo ↷ 移動操作に合わせてリンクを書き換えました。 		en:virtualization:proxmox_ve_6_2_enable_connectx3_en_in_installer [2021-01-09 12:46] (current)
Decomo
Line 1: Line 1:
-====== Enable a ConnectX-3 EN card on Proxmox VE 6.2 Installer ======+====== Enable ConnectX-3 EN cards on Proxmox VE 6.2 Installer ======
  
 Proxmox VE 6.2 contains 'mlx4' kernel modules that are drivers for ConnectX-3 cards, so it can potentially use the card as NIC by doing nothing. However I don't know why PVE installer doesn't load a ''mlx4_en'' module while it loads ''mlx4_core'' one, then the installer doesn't recognise the ConnectX-3 as NIC. Proxmox VE 6.2 contains 'mlx4' kernel modules that are drivers for ConnectX-3 cards, so it can potentially use the card as NIC by doing nothing. However I don't know why PVE installer doesn't load a ''mlx4_en'' module while it loads ''mlx4_core'' one, then the installer doesn't recognise the ConnectX-3 as NIC.
  • en/virtualization/proxmox_ve_6_2_enable_connectx3_en_in_installer.1609115193.txt.gz
  • Last modified: 2020-12-28 09:26
  • by Decomo